GLEDOPTO LED Downlight RGB Smart Light (Zigbee 3.0)

Description

Illuminant compatible with ZigBee gateways such as Philips Hue®, Osram Lightify®, Ikea Tradfri®, Amazon Echo Plus

GL-D-003P (6W) / GL-D-004P (9W) / GL-D-005P (12W)

ZigBee COMPATIBILITY: 

The led bulb works with ZigBee Light Link(ZLL) ZigBee3.0, compatible with Amazon Echo Plus or other brands gateways and Android iOS system.

16 MILLION COLORS CHANGING: 

Dimmable saturation control, the color temperature from 2000-6500K.  
LED bulbs will memorised last colour setting after the power is switched off from the mains.

VOICE CONTROL: 

Works with Alexa Echo Plus, voice control your led bulbs by speaking to Amazon Alexa, you can turn on/off, change the color, dim/brighten the  RGB bulbs.

MULTI APPLICATIONS:

Timer function allows you to set lights bulbs turned on and off at specific time. Suitable for kitchen, bedroom, living room, hall, porch, pantry, wall light, stairs, giving you a special smart home.

• Switch between multiple lighting modes with your choice.
• Rich lamplight atmosphere, give you more pure and fresh sense, available in dimmer & night light mode options
• Brightness and colour temperature dimmable & adjustable from warm white 3000K to cool/cold white 6500K
• Customize your colourful life, 16 million color saturation changes, make life full of beauty
• Home or Away lighting mode, to remote control the smart LED bulb even away from home, to ensure the safety of your home

Rainbow of colors

The color temperature of the light is from 2000k to 6500k (RGB+CCT).
More than 16 million color choices and all of them are dimmable.

You can easily set the color to suit your mood with dimmable brightness.

Brighten up theroom or create a relaxing environment by dimming the light.

Installation

1. Turn off the Power.
2. Plug in the bulb.
3. Now you can connect it with the gateway.

 

Connection with Gateway:

1. Start the device searching on the ZigBee Light Link Gateway, it could take some time.
2. If the Gateway does not find the device, switch off/on the gateway and try again or
3. The Gateway found your device and you can assign it to the different rooms/zones/groups.
4. Now you can use the device1.Switch on your device.

Disconnect with Gateway

1. Now switch off and on within 2 seconds.
2. Repeat off/on four times.
3. Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times.

Link & unlink with 2.4GHZ RF Remote Control

How to Link:

1. Within 3 seconds after power on, click the “on” button of the group to conduct code matching, and the LED lights turns green, indicating successful code matching.
2. Long press the “off” button of the remote control to enter the night light mode, and the brightness and colour can still be adjusted at this time.
3. Long press the small moon key to enter the 60 seconds delay shutdown state.
4. Long press M key to enter automatic mode.

 

How to UNLink:

If the LED is still connected to the ZigBee gateway,

• long press the “on” button on the remote control within 3 seconds after power on or press the button for 5 times continuously, the light will flash for 5 times in the current colour.
• If the LED is not connected to the ZigBee gateway status, on press the “on” button on the remote control within 3 seconds after power on or press the button for 5 times continuously, then the LED light will be fully bright and flashing for 5 times.